Add completion for keywords #21171

MartinGC94 · 2024-02-01T01:25:31Z

PR Summary

Adds completion for language keywords like "switch", "break", etc.
I originally thought this would take a lot of effort, but I thought of a simple solution of simply trying to insert the various keyword categories into the text and see if they are parsed as keywords, though there are some special cases where I try to properly analyze the Asts.
I ended up doing more Ast analysis work than originally planned. It's not perfect, but I think it's good enough for now.

Slight breaking change: I've removed the file completion fallback that is used when a user types in characters that don't create a usable AST. For example: )+!<Tab> this is because it interfered with the keyword completion and its use case seemed questionable.
It only worked if there was nothing else in the script text and of course you'd need files with weird characters at the start of their name.

PR Context

Fixes #10221
Fixes #7891

PR Checklist

pull-request-quantifier-deprecated · 2024-02-01T01:26:09Z

This PR has 282 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Large
Size       : +280 -2
Percentile : 68.2%

Total files changed: 4

Change summary by file extension:
.cs : +119 -2
.resx : +161 -0

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

sdwheeler

I looked at the descriptions in the resx file. It looks good to me. But there are items in there that are documented and don't really work. So I wonder if they should be included.

For example:

using namespace <alias> = <namespace> - does this work? It's not documented.
using type - I believe that this doesn't really work and we don't document it.

MartinGC94 · 2024-02-01T17:07:02Z

Thanks @sdwheeler you are right that those using statements are not currently supported but I'm assuming/hoping that this PR: #16734 which adds those features will get merged in the near future.

…he names of the named blocks.

pull-request-quantifier-deprecated · 2024-02-02T22:58:44Z

This PR has 351 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Large
Size       : +348 -3
Percentile : 75.1%

Total files changed: 5

Change summary by file extension:
.cs : +185 -2
.resx : +161 -0
.ps1 : +2 -1

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-02T23:00:01Z

This PR has 363 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Large
Size       : +348 -15
Percentile : 76.3%

Total files changed: 5

Change summary by file extension:
.cs : +185 -9
.resx : +161 -0
.ps1 : +2 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-02T23:11:49Z

This PR has 363 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Large
Size       : +348 -15
Percentile : 76.3%

Total files changed: 5

Change summary by file extension:
.cs : +185 -9
.resx : +161 -0
.ps1 : +2 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-04T00:10:22Z

This PR has 558 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Large
Size       : +543 -15
Percentile : 85.27%

Total files changed: 5

Change summary by file extension:
.cs : +227 -9
.resx : +161 -0
.ps1 : +155 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-04T22:59:42Z

This PR has 559 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Large
Size       : +544 -15
Percentile : 85.3%

Total files changed: 5

Change summary by file extension:
.cs : +228 -9
.resx : +161 -0
.ps1 : +155 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-06T01:55:11Z

This PR has 549 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Large
Size       : +534 -15
Percentile : 84.97%

Total files changed: 5

Change summary by file extension:
.cs : +218 -9
.resx : +161 -0
.ps1 : +155 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-06T19:31:05Z

This PR has 575 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Large
Size       : +560 -15
Percentile : 85.83%

Total files changed: 5

Change summary by file extension:
.cs : +241 -9
.resx : +161 -0
.ps1 : +158 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-10T17:22:09Z

This PR has 575 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Large
Size       : +560 -15
Percentile : 85.83%

Total files changed: 5

Change summary by file extension:
.cs : +241 -9
.resx : +161 -0
.ps1 : +158 -6

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

microsoft-github-policy-service · 2024-02-18T14:32:31Z

This pull request has been automatically marked as Review Needed because it has been there has not been any activity for 7 days.
Maintainer, please provide feedback and/or mark it as Waiting on Author

Add keyword completions

caa5434

pull-request-quantifier-deprecated bot added the Large label Feb 1, 2024

MartinGC94 changed the title ~~Add completion for keywords~~ WIP: Add completion for keywords Feb 1, 2024

sdwheeler reviewed Feb 1, 2024

View reviewed changes

MartinGC94 added 2 commits February 2, 2024 23:57

Fix tests

4c2eda9

Refine some of the completions, add comments and add completion for t…

f9f8a2d

…he names of the named blocks.

Remove interfering file completion fallback.

f3f676d

Fix missing tooltip for DynamicParam

0ecf5c4

MartinGC94 mentioned this pull request Feb 3, 2024

Completions don't work in a completely empty script file PowerShell/vscode-powershell#4909

Open

6 tasks

MartinGC94 added 3 commits February 4, 2024 01:09

Update tooltips

eac2a85

Fix various scenarios where completion did not work as expected

2b40636

Add tests

5a4f955

pull-request-quantifier-deprecated bot added Extra Large and removed Large labels Feb 4, 2024

MartinGC94 changed the title ~~WIP: Add completion for keywords~~ Add completion for keywords Feb 4, 2024

Fix usingstatement issue

fe317ca

Remove unused code

39d1205

Rework the Ast analysis to be more robust with and without partial input

7e60a33

Merge branch 'PowerShell:master' into KeywordCompletions

9ebc8f9

microsoft-github-policy-service bot added the Review - Needed The PR is being reviewed label Feb 18, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add completion for keywords #21171

Add completion for keywords #21171

MartinGC94 commented Feb 1, 2024 •

edited

pull-request-quantifier-deprecated bot commented Feb 1, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

sdwheeler left a comment

MartinGC94 commented Feb 1, 2024

pull-request-quantifier-deprecated bot commented Feb 2, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 2, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 2, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 4, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 4, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 6, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 6, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 10, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

microsoft-github-policy-service bot commented Feb 18, 2024

Add completion for keywords #21171

Are you sure you want to change the base?

Add completion for keywords #21171

Conversation

MartinGC94 commented Feb 1, 2024 • edited

PR Summary

PR Context

PR Checklist

pull-request-quantifier-deprecated bot commented Feb 1, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

sdwheeler left a comment

Choose a reason for hiding this comment

MartinGC94 commented Feb 1, 2024

pull-request-quantifier-deprecated bot commented Feb 2, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 2, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 2, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 4, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 4, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 6, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 6, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 10, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

microsoft-github-policy-service bot commented Feb 18, 2024

MartinGC94 commented Feb 1, 2024 •

edited