Features • Installation • Scripting/API • Contributors • License

Linux port developed by Tim Schneeberger (@thepbone)

JamesDSP was initially published as an audio effects processor
for Android devices and is written by James Fung (@james34602).

Feel free to join our Telegram group for support and updates

Please help us to translate this app on Crowdin!

• Automatic bass boost
  • Frequency-detecting bass-boost. Automatically sets its own parameters, such as gain, bandwidth, and cut-off frequency, by analyzing the incoming audio stream
• Automatic dynamic range compressor
  • A highly automated multiband dynamic range adjusting effect
• Complex reverberation IIR network (Progenitor 2)
• Interpolated FIR equalizer with flexible bands
• Arbitrary response equalizer (also known as GraphicEQ from EqualizerAPO)
  • AutoEQ database integration (requires network connection)
• Partitioned convolver (Auto segmenting convolution)
  • Supports mono, stereo, full/true stereo (LL, LR, RL, RR) impulse response
• Crossfeed
  • Realistic surround effects
• Soundstage wideness
  • A multiband stereo wideness controller
• ViPER-DDC
  • Perform parametric equalization on audio
  • Create VDC input files using thepbone/DDCToolbox
• Analog modeling
  • An aliasing-free even harmonic generator
• Output limiter
• Scripting engine: Live programmable DSP
  • Write your own audio effects using the EEL2 scripting language
  • Auto-generate a basic user interface for your script to modify specific parameters/constants without editing the actual code
  • The scripting language has been extended using many DSP-related functions for easy access, for example, spectral processing, constant Q transform, multi-purpose FIR filter designer IIR sub-bands transformation, etc...
  • This app also includes a custom minimal scripting IDE:
    • Syntax highlighting
    • Basic code completion
    • Dynamic code outline window
    • Console output support
    • Detailed error messages with inline code highlighting

Designed for use with PipeWire. PulseAudio is only supported for backward compatibility.

PipeWire has a much lower latency compared to PulseAudio when injecting audio effects processors into the audio pipeline. I'm currently not planning to add more advanced support for PulseAudio clients. Features such as selective app exclusion, changing the target audio device, and similar features will only be available to PipeWire clients.

Follow the instructions below if you don't know which one your Linux distribution is using. If you already know, skip to the 'Install dependencies' section.

Run LC_ALL=C pactl info | grep "Server Name:" in your terminal.

If you are using Pipewire the output should look similar to this:

Server Name: PulseAudio (on PipeWire 0.3.35)

If you are using Pulseaudio the output should look exactly like this:

Server Name: pulseaudio

Decide whether you need to install the PipeWire or PulseAudio version of this app!

If you don't know which version fits your Linux setup, go to the PipeWire vs PulseAudio section above.

It is recommended to switch to PipeWire, if possible. JamesDSP's audio backend for PulseAudio is in maintenance-mode; however, it will continue to receive UI-related feature updates.

The installation instructions for the PulseAudio version have been moved to a separate file: INSTALL_PULSE.md.

This section is dedicated to systems using PipeWire as the audio server. If you are still using PulseAudio, please go here.

• Flatpak
• Arch Linux (AUR)
• Fedora/openSUSE
• Build from sources

Universal binary packages for all distros.

The recommended Pipewire version is available for download on FlatHub: https://flathub.org/apps/me.timschneeberger.jdsp4linux

flatpak install me.timschneeberger.jdsp4linux

If you are still using PulseAudio, you need to download the legacy package from my personal repository:

sudo flatpak remote-add --if-not-exists thepbones-repo https://raw.githubusercontent.com/ThePBone/flatpak-repo/main/thepbone.flatpakrepo
flatpak install me.timschneeberger.jdsp4linux.pulse

AUR packages are available:

• Stable version

  

  yay -S jamesdsp
  

• Development version

  

  yay -S jamesdsp-git
  

Package maintained by @theAeon on Fedora COPR. Built for Fedora 34/35/Rawhide and OpenSUSE Tumbleweed.

yum copr enable arrobbins/JDSP4Linux && yum update && yum install JamesDSP

If you are still using PulseAudio with your Fedora/openSUSE installation, refer to the 'Build from sources' section below instead.

Build instructions are available in the BUILD.md file.

Since version 2.5.0, this app supports IPC via D-Bus and is also configurable via a CLI.

You can list all supported commands using jamesdsp --help. Currently, these commands for remote-controlling JamesDSP's audio engine are available:

  --is-connected                           Check if JamesDSP service is active. Returns exit code 1 if not. (Remote)
  --list-keys                              List available audio configuration keys (Remote)
  --get <key>                              Get audio configuration value (Remote)
  --set <key=value>                        Set audio configuration value (format: key=value) (Remote)
  --load-preset <name>                     Load preset by name (Remote)
  --save-preset <name>                     Save current settings as preset (Remote)
  --delete-preset <name>                   Delete preset by name (Remote)
  --list-presets                           List presets (Remote)
  --status                                 Show status (Remote)
  --list-devices                           List audio devices (Remote)
  --list-preset-rules                      List preset rules (Remote)
  --set-preset-rule <deviceId=presetName>  Add/modify preset rule (Remote)
  --delete-preset-rule <deviceId>          Delete preset rule (Remote)

The options should be fairly self-explanatory. For example, jamesdsp --set reverb_enable=true would enable the reverberation setting. Have a look at the audio configuration file at ~/.config/jamesdsp/audio.conf to learn more about possible setting keys and their syntax.

This app also exposes a D-Bus service on the session bus, which can be used by other developers or users:

Service name: me.timschneeberger.jdsp4linux

• GUI-related interface:
  • Path name: /jdsp4linux/gui
  • Interface name: me.timschneeberger.jdsp4linux.Gui
• Audio service-related interface:
  • Path name: /jdsp4linux/service
  • Interface name: me.timschneeberger.jdsp4linux.Service

If you want to test it out, you can use an app like D-Feet to interact with the D-Bus services.

The D-Bus introspection XML is available here: https://github.com/Audio4Linux/JDSP4Linux/blob/master/src/utils/dbus/manifest.xml.

• JamesDSP is randomly killed by the kernel or closes by itself

  • The processing thread of the app may have exceeded the maximum amount of CPU time allowed for a real-time thread on your system.
  • To fix: install the realtime-priorities package, add your user to the realtime group, and re-login. (see issue #155)

• My volume control is not working anymore

  • Don't set the virtual JamesDSP device as the default audio output device. The virtual device has no audio volume controls and should never be used directly. Please set your actual speakers/headphones as the default output device instead.

• Crackling audio

  • Your CPU may be too slow to process the audio sample in time; try to disable some effects (especially resource-hungry ones like the convolver)
  • Set JamesDSP's process to real-time or high priority using a task manager of your choice
  • [Pipewire] Try out the workaround mentioned in issue #47

• James Fung - Developer of the core library 'libjamesdsp'
• yochananmarqos - AUR packages
• theAeon - RPM packages
• PipeWire/Pulse implementation based on EasyEffects by Wellington Wallace

Tim Schneeberger (ThePBone) 7404 words	Kazevic 3173 words	Camellan 3152 words	Katie Frogs (KatieFrogs) 2944 words	catvinyl 2352 words	Choi Jun Hyeong (Gokwu) 2321 words	Gabriel Cabrera Davila (mefsaal) 652 words	NullPointerException (seqfault) 1151 words
mariachini 373 words	tachyglossues 358 words	Gustavo Kureck Piccoli (gkpiccoli) 280 words	Noob Zhang (zhanghua000) 240 words	kzsuser 221 words	AnClark Liu (AnClark) 173 words	Bruh (deproocho) 171 words	HoleHolo 167 words
so1ar 126 words	etiennec79 (etiennec78) 114 words	James Fung (james34602) 72 words	theczechczech 42 words	Alexandre PAIXAO (alex-pex) 30 words	Joel Tony (jaytau) 28 words	crisap94 27 words	Arif Esat Yılmaz (arifesat) 24 words
Semih Aslan (andmydignity) 15 words	Robert Abreu (deathrobert2010) 13 words	Lucas De Paula (ldepaulaf) 11 words	Mr.Positiv (artemgrebennikov310) 4 words	Rkchus Qkxhdu (qkxhdurkchus) 3 words	dev_trace 2 words	Alfredo Hernandez (alfredo30.herz) 2 words	SorasTaz (berkantdu123) 2 words

This project is licensed under GPLv3.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR 
THE USE OR OTHER DEALINGS IN THE SOFTWARE.