openBalena VPN augments an OpenVPN server with the following components/features:

• open-balena-connect-proxy is a http connect proxy that handles connections through the vpn to services on connected devices, used by external services such as balena-proxy
• open-balena-vpn-api which consists of an internal API for handling authentication and tracking device state, and spawns openvpn server instances
• haproxy used for balancing new connections between openvpn instances
• libnss-openvpn is used to handle dns lookups of devices for connections via open-balena-connect-proxy

Networking is configured by a number of environmental variables:

• VPN_GATEWAY (optional) dictates the server end of the p2p connection
• VPN_BASE_SUBNET in CIDR notation is the entire subnet used for all servers
• VPN_INSTANCE_SUBNET_BITMASK is the VLSM to split VPN_BASE_SUBNET into VPN_BASE_PORT and VPN_BASE_MANAGEMENT_PORT

Given a base subnet of 100.64.0.0/10 and a per-instance VLSM of 20 a server the first instance subnet would be 100.64.0.0/20 and the second would be 100.64.16.0/20, and so forth up to 100.127.240.1/20 for the 1024th instance.

If VPN_GATEWAY is not defined then the first usable address of the instance subnet will be used in its place. This address, and the second usable address, are used to facilitate the virtual p2p connections by openvpn.

The rest of the subnet, the third usable address to the last usable address, is used as a DHCP pool for devices.

Note that the dhcp pool size will also dictate the max clients per process, with the max clients per server being max_clients_per_instance * VPN_INSTANCE_COUNT and not the size of the base subnet. A VLSM of 20 will allow for 4,094 clients per instance, and a base subnet of size /10 will allow for a total of a total of 4,194,302 clients.

Base ports are increments by the process instance ID (1-indexed) to calculate the port for that instance.

OpenVPN writes connected client information to /var/run/openvpn/server-${id}.status which are interrogated by libnss-openvpn allowing for lookup of connected device VPN addresses via uuid.

VPN client authentication is initiated via an event from the vpn management console which proxies the credentials to the balena api which ultimately decides the fate of the client.

Connections to devices can be established via open-balena-connect-proxy which exposes a HTTP CONNECT Proxy server allowing for access to devices via a hostname in the format {deviceUUID}.balena:{port}. The destination port is limited based on the requesting user and device configuration. The listening port is configured by the VPN_CONNECT_PROXY_PORT variable.