A set of High Quality presets for Easy Effects.

7 configuration profiles:

• classical 🎻️
• edm 🎹
• hifi 💥️
• indie 🍄
• kpop 🎤️
• lofi 🍃️
• rock 🎸️

Do they sound amazing? Then support us with a ⭐️ and a follow!

1. Download the latest release as zip / tar.gz or read HOW TO BUILD THEM.
2. Unzip and move the .json files to one of the following paths:

• Flatpak: ~/.var/app/com.github.wwmm.easyeffects/config/easyeffects/output
• Repositories: ~/.config/easyeffects/output

3. Ready! Load them from Presets > Output

Centers the signal via Feed | Cutoff sets the limit of frequencies it affects.

Applies volume corrections giving more prominence to the bass. Use it with Autogain

They attenuate the input signal, giving space to the mix.

It makes it sound crunchier.

Applies a High-Pass filter that eliminates bass. Switch to Low-Pass to do the opposite.

They expand the signal recreating a simple / smooth / harsh Dolby Atmos

Increases the dynamic range of bass, midrange and treble.

Increases the dynamic range of the signal making it sound fuller.

Creates a bedroom. Try going beyond these values, you can achieve creative results with some practice.

They create a stereo separation effect.

Normalizes the volume based on a Target | Reset History re-evaluates this operation (refresh) | Maximum History is arbitrary.

They prevent the signal from exceeding 0 dB and becoming distorted | Threshold can replace Autogain in exchange for messing up dynamics.

Helps to find the true perceived loudness of the signal.

You can get more quality in exchange for notable latency. Just follow the steps below:

1. Select Loudness. Set the following values:

2. Select 1st / 2nd / 3rd / 4th Equalizer. Set the following values:

3. Select Filter. Set the following values:

4. Select 1st / 2nd Multiband Compressor. Set the following values:

Band Sidechain Options

5. Select Compressor. Set the following values:

Sidechain

6. Select Limiter. Set the following values:

Some effects are disabled by default, be sure to turn them on and try them out. If you liked it, save it by rewriting the original file.

To achieve different styles, you can set the Release Time to 0.00, 100.00, 200.00, 300.00, 400.00 or 500.00 ms, the Ratio to 1.20:1, 1.50:1, 2.00:1, 3.00:1 or 6.00:1 and the Reactivity to 10.00 or 250.00 ms

Since we DO NOT support old versions, it is vital that you have the current stable branch for them to work.

• Bauer stereophonic-to-binaural DSP

• LSP Loudness Compensator Stereo

• LSP Parametric Equalizer x32 LeftRight

• Calf Bass Enhancer

• LSP Filter Stereo

• LSP Sidechain Multiband Compressor Stereo x8

• LSP Sidechain Compressor Stereo

• Calf Reverb

• LSP Delay Compensator x2 Stereo

• Calf Stereo Tools

• LSP Sidechain Limiter Stereo

• zam-plugins